Vehicles
Sections
80 not categorized PORSCHE 996 USED PARTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 356 1950-59 (includes uncategorized and accessory items) FVDBRO1016003A Weight savings approximately 4kg (8.8 lbs) of rotating unsprung weight. Oem disk weight 10,8kg (23.8 lbs), brembo disk weight 8.9kg (19.69 lbs) rotors: (13") 330x34mm drilled discs bells / hats: precision milled billet aluminum hardware: brembo floating anti-rattle disc hardware by using an aluminum bell for the hub section of the disc, these rotor assemblies save a great deal of weight. Since this is both rotating and unsprung, it benefits the acceleration, braking, and handling of the vehicle. Secondly, it is better able to handle the large temperature changes that a brake disc experiences. The mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has eng...(choose a part on the right to read more)
$1,815.00
Make a selection GR0890101 Features General FitmentACCESSORY
$51.73
Make a selection GR2020 Specially formulated to reduce oil consumption and leakage in high mileage cars. The molecular structure of motor oil saver prolongs engine life while reducing smoking caused by worn internal engine parts. As an added bonus, it rejuvenates gaskets and seals. This product should be added with each oil change for maximum benefit and protection. General FitmentACCESSORY
$8.00
Make a selection KEV53100501 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 4 kg (8.81 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. ** does not include the inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric...(choose a part on the right to read more)
$3,285.70
Make a selection HEI600063 With dmsb license for all 45 mm roll bars for installation in existing bars and cages from heigo (as well as all other manufacturers) 1. To be used with all active rollover protection with a dmsb- or ons certificate from heigo 2. To be used with all active rollover protection with a dmsb- or ons certificate from matter gmbh (graben-neudorf) 3. To be used in so called self constructed devices as decribed in chapter 2 53-8.1.a in the current attachement j or chapter 2 53-8.4 in the old attachment j under the isg. 4 . This harness bar is only allowed to be used at dmsb-events and only at non fia events. Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have...(choose a part on the right to read more) General FitmentALL
From $400.79
Make a selection KEV53100500 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 6.4 kg (14.1 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. - includes inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric mirrors.
$3,473.80
Make a selection HEI600062 With dmsb license for all 40 mm roll bars for installation in existing bars and cages from heigo (as well as all other manufacturers) 1. To be used with all active rollover protection with a dmsb- or ons certificate from heigo 2. To be used with all active rollover protection with a dmsb- or ons certificate from matter gmbh (graben-neudorf) 3. To be used in so called self constructed devices as decribed in chapter 2 53-8.1.a in the current attachement j or chapter 2 53-8.4 in the old attachment j under the isg. 4 . This harness bar is only allowed to be used at dmsb-events and only at non fia events. Every heigo bar or cage is considered a motorsports part and is a special-order item. Motorsports parts may have...(choose a part on the right to read more) General FitmentALL
From $389.06
Make a selection NLA70100300 356's & 912's used three types of oil filters. The mann filter was used for the most part on early 356 (or pre "a") and possibly a few very early a's. This filter is identified by a 10mm bolt. The rest of the cars used either the h-filter (which is identified by a 16mm bolt) or the fram filter (which is identified by a 12mm bolt). Since there are no chassis or engine number breaks which denote the use of these filters, it is best to measure the bolt to identify your filter. Also, h-filter canisters are generally either all silver or silver with a black cover while fram canisters are orange with a black cover. General Fitment356 1950-59356 1960-65
$8.80
Make a selection KEV53100601 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 4 kg (8.81 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. ** does not include the inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric...(choose a part on the right to read more)
$3,285.70
Make a selection NLA70100900 Fram top cover decal, on the front of the cover in the center. 356's & 912's used three types of oil filters. The mann filter was used for the most part on early 356 (or pre "a") and possibly a few very early a's. This filter is identified by a 10mm bolt. The rest of the cars used either the h-filter (which is identified by a 16mm bolt) or the fram filter (which is identified by a 12mm bolt). Since there are no chassis or engine number breaks which denote the use of these filters, it is best to measure the bolt to identify your filter. Also, h-filter canisters are generally either all silver or silver with a black cover while fram canisters are orange with a black cover. General Fitment356 1960-65356 1950-59
$8.80
Make a selection NLA70101200 Fram side decal-large. 356's & 912's used three types of oil filters. The mann filter was used for the most part on early 356 (or pre "a") and possibly a few very early a's. This filter is identified by a 10mm bolt. The rest of the cars used either the h-filter (which is identified by a 16mm bolt) or the fram filter (which is identified by a 12mm bolt). Since there are no chassis or engine number breaks which denote the use of these filters, it is best to measure the bolt to identify your filter. Also, h-filter canisters are generally either all silver or silver with a black cover while fram canisters are orange with a black cover. General Fitment356 1950-59356 1960-65
$8.80
Make a selection NLA70101100 Mann oil filter decal set-late (canister has 10mm bolt). 356's & 912's used three types of oil filters. The mann filter was used for the most part on early 356 (or pre "a") and possibly a few very early a's. This filter is identified by a 10mm bolt. The rest of the cars used either the h-filter (which is identified by a 16mm bolt) or the fram filter (which is identified by a 12mm bolt). Since there are no chassis or engine number breaks which denote the use of these filters, it is best to measure the bolt to identify your filter. Also, h-filter canisters are generally either all silver or silver with a black cover while fram canisters are orange with a black cover. General Fitment356 1950-59356 1960-65
$22.87
Make a selection VDO600845 Snap-in warning lights with 12-v bulbs from vdo. These are used specifically with the 914 aluminum gauge cluster (part number rmb24172), but can be used with all models. General FitmentALL
$21.95
Make a selection VDO600847 Snap-in warning lights with 12-v bulbs from vdo. These are used specifically with the 914 aluminum gauge cluster (part number rmb24172), but can be used with all models. General FitmentALL
$21.95
Make a selection VDO600844 Snap-in warning lights with 12-v bulbs from vdo. These are used specifically with the 914 aluminum gauge cluster (part number rmb24172), but can be used with all models. General FitmentALL
$21.95
Make a selection 35642184 This is a great part to get to finish that brake restoration project. Why settle for used, rusted brake line when for less than coffee these days you can improve your braking drastically by replacing those worn out bridge pipe. This is a new steel brake line bridge pipe on your Porsche pre-a and 356a from 1950 - 1959. View/Change Diagram
From $12.19
Make a selection 10010303808 The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. However, this kit cannot be used with original cams, it requires a more aggressive cam (maximum valve lift (tdc) of 2.1 mm) and has very deep pockets for use with rsr valves. The 109-mm size means that the housings must be modified on non rennsport models. If you have a European rennsport model, these would be slip fit. This kit also requires the larger o-ring seals, part # 96410440180 and larger base gaskets, part # FVD116929. Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resi...(choose a part on the right to read more)
$12,139.99
Make a selection WAP03504310 Extension module for pts luggage system with two-part seperator and solid aluminum floor. Reinforced exterior with anodized aluminum, the lightest material used in the aviation and motor industries. Recessed locks are pressure die-cast and connect steel elements. Robust and ergonomically designed handles. 22 x 14 1/8 x 8 5/8 inches (56 x 36 x 22 cm).
$602.89
Make a selection 9A160210407 A coil-on-plug or pencil coil requires a single spark plug and requires as many coils as there are cylinders. If your ignitions coils are failing, you will experience a rough idle, loss of performance, engine misfires, reduced fuel economy, a check engine light and a no-start condition. Replace it with this genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 6 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment. This part number is currently the latest supersession and can be used in place of part # 9a1 602 104 06. The spark plug is sold separately.
From $59.40
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |